FG Diamonds
Our pre-sterilized Diamond Burs are manufactured from the highest quality stainless steel shanks and natural diamond grit.
This advanced manufacturing, using computer controlled precision engineering, ensures true concentricity and balance, minimizing vibration and potential damage to handpiece bearings. The diamond plating of our bur is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. (Pre-Sterilized)
Inverted Cone – Short Head
The diamond plating of our diamond bur is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Round
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation.
Click to enlarge
Inverted Cone – Rounded Edge
The diamond plating of our diamond bur is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Round End Taper – Long
The diamond plating of our diamond bur is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Inverted Cone
The diamond plating of our diamond bur is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Diablo
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Barrel – Short Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation, occlusal contouring and finishing.
Click to enlarge
Barrel
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation, occlusal contouring and finishing.
Click to enlarge
Wheel – Rounded Rim
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and occlusal contouring.
Click to enlarge
Flat End Cylinder – Short Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for removal of old fillings and preparation on cavities and crowns, well as, Inlay/Onlay preparation.
Click to enlarge
Flat End Cylinder
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for removal of old fillings and preparation on cavities and crowns, as well as, Inlay/Onlay preparation.
Click to enlarge
Flat End Cylinder – Long Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for removal of old fillings and preparation on cavities and crowns, as well as, Inlay/Onlay preparation.
Click to enlarge
Beveled Cylinder – Short
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Beveled Cylinder
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation and removal of old fillings.
Click to enlarge
Round End Cylinder – Short with Short Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for ceramic restorations and removal of old fillings, as well as, preparation for cavitites, inlay/onlay and crowns.
Click to enlarge
Round End Cylinder – Short
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for ceramic restorations and removal of old fillings, as well as, preparation for cavitites, inlay/onlay and crowns.
Click to enlarge
Round End Cylinder
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for ceramic restorations and removal of old fillings. As well as preparation for cavitites, inlay/onlay and crowns.
Click to enlarge
KS Cylinder
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability.
Click to enlarge
End Cutting Cylinder – Short
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for cavity and crown preparation.
Click to enlarge
Pointed Cone – Short Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation.
Click to enlarge
Pointed Cone
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation.
Click to enlarge
Pointed Cone – Long Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation
Click to enlarge
Flat End Taper – Short
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for removal of old fillings, as well as preparation for cavitites, inlay/onlay and crowns.
Click to enlarge
Flat End Taper
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for removal of old fillings, as well as preparation for cavitites, inlay/onlay and crowns.
Click to enlarge
Round End Taper – Short (197)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper – XShort (197)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper (198)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper (198)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper – Short (198)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper – Long (198)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper (199)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Round End Taper – Short (199)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for Laminate preparation, crown preparation and removal of old fillings.
Click to enlarge
Pear
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for removal of old fillings, cavity preparation and inlay/onlay preparation.
Click to enlarge
Flame – Short Head
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for crown preparation and inlay/onlay preparation.
Click to enlarge
Flame
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for crown preparation and inlay/onlay preparation.
Click to enlarge
Bud
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for occlusal contouring, crown preparation and contouring/finishing.
Click to enlarge
Bud Slender
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation.
Click to enlarge
Egg
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation. Used for crown preparation and occlusal contouring. As well as contouring and finishing.
Click to enlarge
Torpedo
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for removal of old fillings and crown preparation.
Click to enlarge
Gingival Cutterage
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for cavity preparation and crown preparation.
Click to enlarge
Interdental
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation.
Click to enlarge
Gross Reduction Cylinder – Short
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for crown preparation.
Click to enlarge
Gross Reduction Taper – Short
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability.
Click to enlarge
Flame Needle – Short (536)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation.
Click to enlarge
Flame Needle – Short (540)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for surface finishing and crown preparation.
Click to enlarge
Round Edge Taper – Short (544)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for cavity preparation and inlay/onlay preparation.
Click to enlarge
Round Edge Taper – Short (546)
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for cavity preparation and inlay/onlay preparation.
Click to enlarge
Round Edge Taper
The diamond plating of our diamond burs is carried out under strictly controlled conditions specific to the bur pattern involved. This process gives the highest strength and even distribution of diamond, resulting in a concentric, balanced bur with long lasting cutting ability. Used for cavity preparation and inlay/onlay preparation.
Click to enlarge
